Cambridge Chimney Sweep & Repair - 877-425-9908

Our Service Area

Middlesex County and the surrounding area
of Cambridge, Massachusetts

Open Hours

CALL ANYTIME

24/7 Support

877-425-9908

Services We Offer

Annual Chimney Sweep and Creosote Removal, Annual Inspection, Roof Repairs and Masonry Rebuilds, Chimney Lining, Crack and Gas Leak Repairs, Correct Improper Drafting, Firebox Repair, Obstruction Removal, Dryer Vent and Furnace Flue Sweeps, Cap Installation, and more. Give us a call today!



Chimney Sweep & Repair Pro Cambridge provides professional chimney sweep, chimney cleaning, and chimney repair services in Cambridge, Massachusetts. We are fully licensed in the state of Massachusetts, and also keep up with the latest fire safety courses available. This is because your family's safety is our number one priority and we meet that priority by eliminating chimney and heating appliance hazards that can cause house fires.  The best way to maintain that safety is to be certified and knowledgeable in every aspect of the chimney business.  Our professional certifications ensure that your chimney cleaning, inspection, and repairs will be done in accordance with the National Fire Protection Association's regulations for chimney fire safety.

The National Fire Protection Association Standard 211 says, "Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary." Not only does Chimney Sweep & Repair Pro Cambridge highly recommend you get your chimney inspected and cleaned once a year, we also recommend cleaning it more often if you see a buildup of creosote that is 1/8 of an inch thick.

Chimney Sweep & Repair Pro Cambridge strives to bring the highest level of professional and technical expertise to our service area as well as educate our customers. We provide a detailed explanation about the decisions you face regarding your chimney and guide you through the options available. After you are completely informed, we work with you to choose the safest and most efficient solution at the most economical price.

Call Chimney Sweep & Repair Pro Cambridge prior to the winter rush to get us when we are not inundated with work. Spring and summer work is off peak and you will have no problems getting someone to do the work quickly. Of course, we are available all year to service your needs, please call today! Nothing is more important to us than the safety of each one of our customers.

Chimney Sweep Useful Tip:

Guide to Installing a chimney Access Door
A chimney access door allows you to access the lower parts of the chimney to remove debris and combustion waste such as ash. It also allows you to easily clean the chimney. Herein we shall look at some steps to follow when installing or replacing a chimney access door.

The hard part during the installation would be the drilling of a hole as it requires a masonry drill and would take quite some time. Below are some items you will need when installing the access door;
  • Caulk gun.
  • Heat resistant caulk.
  • Cold chisel.
  • Mortar.
  • Hammer drill.
  • Bucket.
  • Trowel.
Ensure that the chimney has completely cooled off to avoid burns. Place the chimney door about eight inches off the ground and trace its perimeter on the wall with your chisel. Drill holes on all the corners of your sketch using the hammer drill. Drill other holes one inch away from the holes drilled at the corner of the sketch.

Chisel between the holes to create some sort of depression that joins them. Mix some mortar and using the trowel, place an even layer at the bottom of the chimney opening. Place some mortar at the top and then place the access door in the opening to the point it is flush aligned with the chimney. Once the mortar sets bead the anti-heat caulk along the edges of the access door using the caulk gun. Following the above steps will aid you in installing your chimney access door.

The chimney access door is underappreciated and overlooked. Not installed in every chimney, it's a back door of the chimney where all rubbish and mess is taken out. Whenever installed, the chimney access door is behind fireplace and located outside house. Before it is opened, all mess should be cleaned up. Caulk, bricks, flue tile liner, dust, or any debris accumulate with the regular use of fireplace. Condition of chimney flue is revealed by debris. For instance, concrete at a bottom of clean out area will indicate damage at top of chimney from frost, water, and animals. Concrete debris will signal that chimney is the potential hazard. While looking up through access door, the daylight must be visible from top of chimney.

On closing door, surrounding area must get inspected for ash, leaks, or other debris. Suppose bricks surrounding door appear worn and old, it will be advisable for replacing it before they crumble more and fireplace exit breaks far apart. Making use of brick hammer or chisel, either homeowner and chimney mason will remove mortar or loose bricks over opening. Bricks then can get replaced and new frame added over cleanout door. While chimney access outdoor can be worn or you want to install one in the chimney that lacks this, measure dimensions of preexisting door or available space, determine best pattern & door for needs. Door should be non-rusting, airtight, and give simple access to flue.