Vernon Chimney Sweep & Repair - 877-425-9908

Our Service Area

Tolland County and the surrounding area
of Vernon, Connecticut

Open Hours

CALL ANYTIME

24/7 Support

877-425-9908

Services We Offer

Annual Chimney Sweep and Creosote Removal, Annual Inspection, Roof Repairs and Masonry Rebuilds, Chimney Lining, Crack and Gas Leak Repairs, Correct Improper Drafting, Firebox Repair, Obstruction Removal, Dryer Vent and Furnace Flue Sweeps, Cap Installation, and more. Give us a call today!



Chimney Sweep & Repair Pro Vernon provides professional chimney sweep, chimney cleaning, and chimney repair services in Vernon, Connecticut. We are fully licensed in the state of Connecticut, and also keep up with the latest fire safety courses available. This is because your family's safety is our number one priority and we meet that priority by eliminating chimney and heating appliance hazards that can cause house fires.  The best way to maintain that safety is to be certified and knowledgeable in every aspect of the chimney business.  Our professional certifications ensure that your chimney cleaning, inspection, and repairs will be done in accordance with the National Fire Protection Association's regulations for chimney fire safety.

The National Fire Protection Association Standard 211 says, "Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary." Not only does Chimney Sweep & Repair Pro Vernon highly recommend you get your chimney inspected and cleaned once a year, we also recommend cleaning it more often if you see a buildup of creosote that is 1/8 of an inch thick.

Chimney Sweep & Repair Pro Vernon strives to bring the highest level of professional and technical expertise to our service area as well as educate our customers. We provide a detailed explanation about the decisions you face regarding your chimney and guide you through the options available. After you are completely informed, we work with you to choose the safest and most efficient solution at the most economical price.

Call Chimney Sweep & Repair Pro Vernon prior to the winter rush to get us when we are not inundated with work. Spring and summer work is off peak and you will have no problems getting someone to do the work quickly. Of course, we are available all year to service your needs, please call today! Nothing is more important to us than the safety of each one of our customers.

Chimney Sweep Useful Tip:

Best Selling Chimney Cement and Mortar
Chimney rebuild cement and mortar are used when repairing the chimney or fire place. They are used to seal cracks in concrete, blocks or brick surface around the chimney. Most easily blend to the chimney masonry.

MEECO'S red devil 1352 is a fireplace mortar and furnace cement. It is already pre-mixed in is ready to use silicates of high temperature. It is used to seal and bond both metal and masonry in working temperature. Its design allows it to be used in repairing and patching chipped or cracked mortar and fire brick.

Chimney sweep furnace cement is also widely used in fire places. It is used to fix cracks in stoves and holes in fire bricks. It is a premixed gritty, grey and used in places with high temperatures and adhesiveness is needed.

Rutlands black furnace cement is used for repairing very small cracks. It adheres to firebricks, stones and metal.

Mortar Mix

The high quality of masons mortar mix will do the job. The best mortars are designed from the Portland Cement base & include ingredients like limestone, clay and silica sand. Some are been colored to match its original shade of the mortar that was been used during the construction. For good results, follow mixing directions rightly, if it is the powder, and follow application procedures, such as cleaning joints & applying in the temperatures over 60 degrees.

The masons' mortar is accessible at home improvement and hardware stores. The chimney mortar is been classified as the Type N, medium compressive-strength mix consisting of one part cement, one part lime and six parts sand. The type N is made for outside and above grade walls that are exposed to the harsh weather climate.

Vinyl Concrete Patch

Vinyl concrete patch will be the better solution than the mortar for larger jobs. Vinyl composition allows concrete to "give" during the robust weather situations. But, patch color might be lighter than original mortar color that might make this very less appealing for the chimney tuckpointing applications. Common uses for the mortar in the chimneys are for the mortar repair between bricks and tuckpointing. Generally, mortar comes as large bag of the powder that should get mixed with the water, as per the makers directions.

Most common kind is called as masons mortar that can be used to build chimneys & repairing this. For the smaller jobs, the pre-mix mortar also is available, which can be used right from container. And repointing is suggested for the brick and the stone chimneys that can get hazardous and destabilized if connective mortar isn't maintained. When the mortar degrades and cracks, it allows water in that causes damage and facilitates growth of the mold, then repointed as required.