Big Bear Chimney Sweep & Repair - 877-425-9908

Our Service Area

San Bernardino County and the surrounding area
of Big Bear, California

Open Hours

CALL ANYTIME

24/7 Support

877-425-9908

Services We Offer

Annual Chimney Sweep and Creosote Removal, Annual Inspection, Roof Repairs and Masonry Rebuilds, Chimney Lining, Crack and Gas Leak Repairs, Correct Improper Drafting, Firebox Repair, Obstruction Removal, Dryer Vent and Furnace Flue Sweeps, Cap Installation, and more. Give us a call today!



Chimney Sweep & Repair Pro Big Bear provides professional chimney sweep, chimney cleaning, and chimney repair services in Big Bear, California. We are fully licensed in the state of California, and also keep up with the latest fire safety courses available. This is because your family's safety is our number one priority and we meet that priority by eliminating chimney and heating appliance hazards that can cause house fires.  The best way to maintain that safety is to be certified and knowledgeable in every aspect of the chimney business.  Our professional certifications ensure that your chimney cleaning, inspection, and repairs will be done in accordance with the National Fire Protection Association's regulations for chimney fire safety.

The National Fire Protection Association Standard 211 says, "Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary." Not only does Chimney Sweep & Repair Pro Big Bear highly recommend you get your chimney inspected and cleaned once a year, we also recommend cleaning it more often if you see a buildup of creosote that is 1/8 of an inch thick.

Chimney Sweep & Repair Pro Big Bear strives to bring the highest level of professional and technical expertise to our service area as well as educate our customers. We provide a detailed explanation about the decisions you face regarding your chimney and guide you through the options available. After you are completely informed, we work with you to choose the safest and most efficient solution at the most economical price.

Call Chimney Sweep & Repair Pro Big Bear prior to the winter rush to get us when we are not inundated with work. Spring and summer work is off peak and you will have no problems getting someone to do the work quickly. Of course, we are available all year to service your needs, please call today! Nothing is more important to us than the safety of each one of our customers.

Chimney Sweep Useful Tip:

Different types of soot removers you can use
The creosote soot build up may be a problem for any type of the fireplace but there are many ways to remove the soot in the chimney. You can find chemical soot removers and they are found in different categories and they feature different array of the products that you can use to clean your chimney. The chemical cleaner can be used by both the professional and homeowners to get rid of the dangerous creosote.

You can also find the chemical dry cleaning sponge that removes the smoke damage. The sponge are good when it comes to removing the soot, smudges, smears and smoke damage at any surface of the chimney.

You can also use a soot remover powder. The powder removes the soot and it eliminates the problem of suffering the hazardous fire. It reduces the corrosion on the exhaust system, it reduces the soot ignition point and the cleaning cost. It increases the efficiency and heat transfer and it is easy to be applied.

The soot remover powder uses different types of the combustion chemical which has been formulated to remove the soot safely and the fireplace deposit from the diesel engine and boilers. It helps in removing the fireside corrosion together with the binders of deposit caused by the corrosion.

The residual fuel oil found in the market has a high level of asphalt carbon with the sulphur that contaminate the gas that it is being exhausted and this lead to a high level of the deposits of soot. The soot remover helps to increase the burning degree o the oil so that the oil can burn off easily. Only light ash is left as byproduct and this can be removed easily.

Using the heavy residual fuel increase the soot deposits and such tendencies will always increase if special method is not used to add fuel additives. The additives reduce the soot stickiness and it is important with large fireplace which are exposed to a high level of the soot deposit. The soot remover powder may be used for any type of the chimney for oil fired, coal fired and diesel fired appliance.

In addition of the soot remover, you may also use a soot blower. This is going to remove the soot which is deposited the furnace because of the combustion. There are different types of the soot blower which are wall blower, air heat blower and long rectractable soot blower.

The steam blowing medium is air and steam. The steam is used like a medium to blow the soot away and the soot blower is cheaper compared to using control air systems or compressors motors. The soot blower can be used manually or a remote controller motor can be used instead. The soot is removed by the use of the heating surface and it is going to be blown out of the flue gasses. When the fireplace has a dust collector, it traps the soot and the soot should not be removed through the chimney stack. It is important to remove the soot because it can easily cause the fire.