Cheboygan Chimney Sweep & Repair - Chimney Cleaning Services in Cheboygan, Michigan

Cheboygan Chimney Sweep & Repair - 877-425-9908

Our Service Area

Cheboygan County and the surrounding area
of Cheboygan, Michigan

Open Hours

CALL ANYTIME

24/7 Support

877-425-9908

Services We Offer

Annual Chimney Sweep and Creosote Removal, Annual Inspection, Roof Repairs and Masonry Rebuilds, Chimney Lining, Crack and Gas Leak Repairs, Correct Improper Drafting, Firebox Repair, Obstruction Removal, Dryer Vent and Furnace Flue Sweeps, Cap Installation, and more. Give us a call today!



Chimney Sweep & Repair Pro Cheboygan provides professional chimney sweep, chimney cleaning, and chimney repair services in Cheboygan, Michigan. We are fully licensed in the state of Michigan, and also keep up with the latest fire safety courses available. This is because your family's safety is our number one priority and we meet that priority by eliminating chimney and heating appliance hazards that can cause house fires.  The best way to maintain that safety is to be certified and knowledgeable in every aspect of the chimney business.  Our professional certifications ensure that your chimney cleaning, inspection, and repairs will be done in accordance with the National Fire Protection Association's regulations for chimney fire safety.

The National Fire Protection Association Standard 211 says, "Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary." Not only does Chimney Sweep & Repair Pro Cheboygan highly recommend you get your chimney inspected and cleaned once a year, we also recommend cleaning it more often if you see a buildup of creosote that is 1/8 of an inch thick.

Chimney Sweep & Repair Pro Cheboygan strives to bring the highest level of professional and technical expertise to our service area as well as educate our customers. We provide a detailed explanation about the decisions you face regarding your chimney and guide you through the options available. After you are completely informed, we work with you to choose the safest and most efficient solution at the most economical price.

Call Chimney Sweep & Repair Pro Cheboygan prior to the winter rush to get us when we are not inundated with work. Spring and summer work is off peak and you will have no problems getting someone to do the work quickly. Of course, we are available all year to service your needs, please call today! Nothing is more important to us than the safety of each one of our customers.

Chimney Sweep Useful Tip:

If your fireplace is a costly unit, you should not try to put back the fire box on your own. Only a professional mason should attempt to substitute the fire box with a new one. However, if you have a smaller fireplace, replacing the fire box is very easy because the unit is simple.

When attempting to replace the firebox, either on your own or with the help of a professional, you must firstly observe the construction of the firebox. If it is a manufactured firebox, you must stick to the manufacturer's previously designated panels to replace it. Check the measurements of the fire box before getting on with the job.

Fireboxes should not be substituted without first checking whether a replacement is required. Given below are certain signals that one should check to see if the firebox is still working properly:

• See if there are any cracks on the firebox. Cracks mean that you should definitely replace the firebox.

• With a trowel, rub various sections of the mortar in the firebox and see if it is crumbling. It you observe any crumbling, then the firebox needs a replacement.

The following steps should be taken to substitute an old firebox with a fresh one:

1) Cement preparation for masonry: The instructions provided on the cement bag should be followed. The correct mix of cement, sand, and other ingredients should be done.

2) Clearing old materials: Get rid of the old mortar in the fire box with a hand rake. Use a crowbar to loosen mortar that is adhering to the bricks and release it with a trowel.

After the removal of the mortar, all the bricks should not be removed at once. The bricks should be taken out section by section. Thus, slowly, all the old bricks will be replaced by new bricks and joined with fresh mortar.

3) Combustible clearance: You can enquire of professional masons whether a clearance of 0.5 inches is needed for your firebox.

4) Manufacturer's specifications: Check the bottom panel of your firebox for specifications given by the manufacturer. Remove these specifications from the panel and store it for future reference.

5) Choose a new model: On the basis of the specifications of the previous model, choose a new model.

6) Put back panels: Replace the old panels with new ones, if you find that it is pre-fabricated.

7) Draw patterns on bricks: The appropriate patterns can be drawn on the bricks with the help of a trowel. Refractories are used to put cement on the panels, which gives it proper outlines.